Car wash area descaling products
Scalex
This fast-acting descaler was developed for the effective removal of unsightly water scale and algae from car wash areas.
ast acting descaler
Scalex is a fast-acting descaler to remove unsightly water scale and algae from car wash areas, toilets and porcelain, non-ferrous and ferrous surfaces.
- Acid based concentrated cleaner
- Removes unsightly water scale and algae
- Safe on glass and aluminium when used as directed
- Easy to apply - easy to rinse away
- Rapid results
- No unpleasant fumes
- Safer than hydrochloric acid based products
- Biodegradable surfactants
DIRECTIONS FOR USE
Car Wash Area Cleaning:
For badly scaled areas Scalex should be used undiluted. For regular cleaning use a dilution rate of 1 part Scalex to 8 parts water. Apply with a non-misting sprayer and agitate with a brush. Allow to act for 5-10 minutes and rinse with plenty of water.
Toilet and Porcelain Cleaning:
Dilute with water (warm is more efficient) dependent upon degree of staining to be removed. It is sometimes necessary to use neat or up to a 1:4 dilution initially. Maintenance cleaning thereafter calls for a solution of up to 1:20 with water.
DO NOT USE ON ENAMEL SURFACES
Non-Ferrous Metal Surfaces:
Oxidisation and tarnish is easily removed from brass, bronze and similar materials by applications between neat and 1:40. Initial cleaning of badly stained surfaces may require neat application with brush, swab or spray. Allow to stand for about 15 minutes. Then rinse clean with water. Maintenance treatment requires a dilution of up to 1:40 dependent upon degree of staining.
Ferrous Surfaces:
Application neat or in strong dilution will remove light rust.
PACKAGING
4 x 5 litres, 25 litres and 200 litre drums.
HEALTH and SAFETY INSTRUCTIONS:
Always consult the product label and Dasic Safety Data Sheet before use.